Grouting Products

Approx. Rs 500 / BagGet Latest Price

Additional Information:

Approx. Rs 450 / BagGet Latest Price

Dr. S. Bond grout gp2 is supplied as a ready to use dry powder and resin. Dr.s.bond grout gp2 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimizing water demand. The low water demand ensures high early strength. The graded fillers are designed to assist uniform mixing and produce a consistent grout.

Advantages:

• Gaseous expansion system compensates for shrinkage and settlement in the plastic state
• No metallic iron content to cause staining
• Pre-packed material overcomes onsite batching variations
• Develops high early strength without the use of chlorides
• High ultimate strength ensure the durability of the hardened grout
• Free flow ensures high level of contact with load bearing area

• Typical applications would be the grouting of base plates of turbines, Compressors,
• Boiler feed pumps etc.,
• It can also be used for anchoring a wide range of fixings. These include masts, anchor bolts and fence posts.

Additional Information:

Approx. Rs 500 / BagGet Latest Price

Additional Information:

Approx. Rs 450 / BagGet Latest Price

Additional Information:

Approx. Rs 500 / BagGet Latest Price

Additional Information:

Approx. Rs 450 / BagGet Latest Price

Additional Information:

Approx. Rs 2,500 / PackGet Latest Price

Additional Information:

Approx. Rs 500 / KgGet Latest Price

Additional Information:

Approx. Rs 25 / KgGet Latest Price

DESCRIPTION/ADVANTAGES: Non shrink crack resistant polymer based pigmented cementations tile joint fille

APPLICATION: Joint filling of tiles, to match colour of tiles, either by using same or contract colours

HOW TO USE: Mix 3 parts of tile mate with one part by volume of water to as tiff consistency and leave for 10 minutes. Re-mix and use.

PACKAGE: 5, 10, 25Kg1Kg Pack Pack

COVERAGE: 120 sq ft per kg at 3mm width 12” x 12” tile

Additional Information:

Approx. Rs 500 / BagGet Latest Price

GP-2 Non-Shrink Grout is supplied as a ready to use dry powder, requiring only the addition of water to produce a free-flowing, non-shrink grout. The material is blend of specially processed cement, pregraded fillers and additives which impart:

• Good early and final strengths due to very low water requirement
• Controlled expansion to retain the original volume filled even after setting
• Free flow characteristics without any segregation and bleeding.

Dr. S. Bond GP2, on setting will have a micro-cellular structure with high frost, fire and oil resistance.

Uses:

• Grout GP2 is used for effective support beneath load bearing units especially where static and operational loads apply. Also as an efficient medium for transferring all operational loads to the foundation. For free flow grouting of machine base plates, crane and transporter rails, standing equipment bed plates, stanchion bases, steel rolling mill beds, pump sets etc.

Advantages:

• Non-Shrink - Will continue to occupy the filled space without shrinkage. Continues to provide support to the bearing areas and dampens vibration.
• Free Flow - Ensures high level of contact with load bearing area. Also helps complete filling without voids. No need for external aids like rodding, poking, chaining etc.
• Pre-Packed And Factory Controlled - Consistency and reliability ensured. Site batching and blending variations eliminated.
• Iron Free - No chance of deterioration by uncontrolled rust expansion, corrosion and staining of grout.
• Chloride Free - Does not cause corrosion of machine parts, anchor bolts etc., in contact with grout.

Area Of Applications:

• Effective support beneath load bearing units
• Static and operational loads
• Also as an efficient medium for transferring all operational loads to the foundation
• For free flow grouting of machine base plates
• Crane and transporter rails

Note: Cubes cast were kept under resistant before testing to simulate site condition. Size of the cubes used 70.6 mm x 70.6 mm x 70.6 mm tested at 30⁰C.

Young''s Modulus: Controlled expansion occurs in the unset material to ensure that the grout, when cured, will continue to occupy its original volume within the confines of the voids in which it has placed.

Preparation:

• Foundation Surface - The substrate surface must be free from oil, grease or any loosely adherent material. If the concrete surface is defective or has laitence, it must be cut back to a sound base. Bolt holes and fixing pockets must be blown clean of any dirt or debris
• Pre-Soaking - Several hours prior to placing, the concrete substrates should be saturated with clean water. Immediately before grouting takes place any free water should be removed with particular care being taken to blow out all bolt holes and pockets.
• Base Plate - It is essential that this is clean and free from oil, grease or scale. Air pressure relief holes should be provided to allow venting of any isolated high spots.
• Leveling Shims - If these are to be removed after the grout has hardened, they should be treated with a thin layer of grease.

Approx. Rs 450 / BagGet Latest Price

Additional Information: