Dr. S. Bond Construction Chemicals

ECIL, Hyderabad, Telangana

GST No. 36AHEPK6854D1ZC

Send Email
0804898284380% Response Rate
Search

Home » Our Products » Tile Adhesive


Tile Adhesive

We are a leading Manufacturer of tile adhesive from Hyderabad, India.

Tile Adhesive

REQUEST CALLBACK

Tile Adhesive
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 350 / BagGet Latest Price

Product Details:
Packaging Size25 Kg
BrandDr.s. Bond
CategoriesCementitious
ApplicationTile On Tile, Tile Fixing
TypesCeramic, Vitrified, marbles,terrazzo tiles
FormPowder
Coverage Area1 BAG(25 KG) -63 SFT / 5.85 SQM

This is a unique formulation which has excellent adhesive property in fixing tiles .This is also suitable for the bonding of different construction materials in interior and exterior areas.

 

ADVANTAGES :

Tropical grade to suit Indian working conditions, Good open wet time, Good slip resistance, High adhesive strength, Water proof, Good slip resistance

Standards Compliance - Dr.s.bond conforms to BS 5980 Class AA Type 1 and suitability for contact with potable water as per BS 6920 Part 1.

 

PROPERTIES:

Specific gravity : 1.9 to 2.0 g/cc

Technical support - Dr.s.bond offers a comprehensive technical support service to specifiers, end users and contractors. It is also able to offer on-site technical assistance, an AutoCAD facility and dedicated specification assistance in locations all over the world.

Instructions for use Surface preparation - All surfaces must be sound and thoroughly clean before Dr.s.bond tile adhesive is applied. All traces of grease or oil must be removed with a chemical degreaser. All loose particles of mortar, old wallpaper, paint etc. Must be physically removed

Surfaces - Dr.s.bond tile adhesive can be applied directly on concrete, cement screeds, and cement or lime mortar. Special attention must be given to new construction prior to commencing tiling. Tiles should not be placed on concrete or brickwork until all shrinkage movement has taken place. To use Dr.s.bond tile adhesive on gypsum or gypsum board substrates, (1 : 3 with water) should be applied to the surface of the gypsum or gypsum board prior to application of Dr.s.bond tile adhesive

Mixing - Dr.s.bond tile adhesive should be mixed with clear potable water in the ratio 3:1 by weight (3 part powder : 1 part water). A slow speed drill fitted with a mixing paddle is recommended for mixing. Add powder to water and mix until a uniform, lump-free consistency is achieved. The total quantitiy of water may be slightly adjusted to achieve the required consistency.

 

 

 

Yes! I am Interested

 
X


Explore More Products

Contact via E-mail
Contact via SMS
Kanaparthi Srikanth (Proprietor)
Dr. S. Bond Construction Chemicals
Module No. 402/C, Opposite To Radhika Multiplex, ECIL
Hyderabad - 500062, Telangana, India
Call Us: 
Call Response Rate: 80%
Share Us :



Home  |   Introduction   |  Our Products  |  Site Map  |   Contact Us

© Dr. S. Bond Construction Chemicals. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Dr. S. Bond Construction Chemicals