Dr. S. Bond Construction Chemicals

ECIL, Hyderabad, Telangana


Send Email
0804898284380% Response Rate

Home » Our Products » Ready Mix Plastering Mortar

Ready Mix Plastering Mortar

Leading Manufacturer of ready wall mix plaster from Hyderabad.

Ready Wall Mix Plaster


Ready Wall Mix Plaster
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 300 / BagGet Latest Price

Product Details:
Minimum Order Quantity50 Bag
Packaging Size40 kg bag
Materialready stock
Packaging TypeBag
Maximum Applicable Thickness Per Layer6-12
Construction Material Typecementatious
Flexural Strength6.4-8.6 N/Mm2,7-28 days
Compressive Strength8.8,16.8,31.3,34.7 (1,3,7,28 Days)
Mix Wet Density2.01 G/Cc
Water Absorption8.0 % 28 Days
Tensile Strength2.8-4.6 N/mm2,7-28 days
Loose Dry Density1274 Kg/M3
Flow210 mm
Rodded Dry Density1504 Kg/M3

Dr.S.Bond Ready mix Plaster is a one component, pre-packed polymer modified mortar combining cement with selected grades of sand and several admixtures; used as red and concrete bricks adhesive, and plaster. It has excellent adhesion.


  • Excellent adhesion
  • Prevents air cracks caused by material shrinkage
  • More efficient
  • Plaster surface result is not rough with maximum 3 mm grain size sand
  • Factory mixed – consistent quality
  • Easy to use and apply, just add water


Area Of Application:

  • Bricks
  • AAC Blocks/ Concrete Block
  • Concrete Surface

Application Instructions:


  • Pour 6.4 l of water for 40 kg bag into mixing vessel then mix slowly and mix properly.
  • Mixing time is ~ 3 minutes. A slow speed mixer is recommended (300 – 600 rpm).

Mixing Ratio Of Water:




Water Mixing Ratio


Dr.S.Bond Ready Mix Plaster

40 KG

6.4 L

  • Application area surface must be clean, sound, level and uncontaminated by oil or grease. Remove cement laitance, dust, and loosely adhering particles. Absorbent substrates must be pre-wetted to saturated surface dry conditions.
  • Apply with flat trowel.




Brush Application


Coverage (40 KG BAG )

7.4Sqm / 80 sft 4mm

4.6 sqm/50 sft 6mm


Clean all tools and application equipment with water immediately after use. Hardened / cured material can only be mechanically removed.

Packing - Dr.S.Bond Ready Mix Plaster : 40 Kg Bag


Important Note: Dr.S.Bond products are guaranteed against defective materials and manufacture and are sold subject to its standard terms and conditions of sale, copies of which may be obtained on request. Whilst Dr.S.Bond endeavours to ensure that any advice, recommendation specification or information it may give is accurate and correct, it cannot, because it has no direct or continuous control over where or how its products are applied, accept any liability either directly or indirectly arising from the use of its products whether or not in accordance with any advice, specification, recommendation or information given by it.

Additional Information:

  • Production Capacity: 1000
  • Delivery Time: immediately
  • Packaging Details: 40 KG BAG
  • Yes! I am Interested


    Explore More Products

    Contact via E-mail
    Contact via SMS
    Kanaparthi Srikanth (Proprietor)
    Dr. S. Bond Construction Chemicals
    Module No. 402/C, Opposite To Radhika Multiplex,ECIL
    Hyderabad - 500062, Telangana, India
    Call Us: 
    Call Response Rate: 80%
    Share Us :

    Home  |   Introduction   |  Our Products  |  Site Map  |   Contact Us

    © Dr. S. Bond Construction Chemicals. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Dr. S. Bond Construction Chemicals