Water Proofing Chemicals

Approx. Rs 2,500 / PackGet Latest Price

Additional Information:

Approx. Rs 2,500 / PackGet Latest Price

Additional Information:

Approx. Rs 2,300 / PackGet Latest Price

Additional Information:

Approx. Rs 300 / LitreGet Latest Price

Dr. S. Bond SBR is modified styrene butadiene emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications too.

Advantages:

• Simple To Use - Single component, gauged as required.
• High - Provides excellent bond to concrete, adhesion plaster, masonry, stone work, etc.
• Improves -Gives weather resistant mortar with improved durability impermeability to chlorides and other harmful agents.
• Reduces - Provides waterproof screeds, plasters and Permeability slurries.
• Increases - Improved tensile and flexural properties strength allow thin applications.
• Versatile - Compatible with all common hydraulic cements.
• Cost Effective - Dr.s.bond SBR is economical to use

• For modifying and improving bonding of floor toppings
• Renderings and mortars
• Repair of worn
• Damaged and spalled concrete
• Repair of large cracks
• Polymer modified floor screeds
• Waterproof plasters for masonary and slurries
• Repairing of old and new structural repairs

• Cementitious based materials have limited chemical resitance. The addition of Dr.S.Bond SBR to cement mortars reduces permeability and therefore helps reduce the rate of attack by aggressive chemicals.

• Surface Preparation - The object of the surface preparation is to achieve a clean sound surface with a good mechanical key. All substrates should be cleaned and free of dust, plaster, oil, paint, grease, corrosion deposits, and any other deleterious substances. Laitence should be removed by mechanical means. Smooth substrates must be mechanically roughened e.g. by scabbling, needle gun or grit blasting to provide an adequate key.
• Corroded reinforcing steel should be exposed around its full circumference and cleaned to remove all loose scale and corrosion deposits. It is always preferably to clean the steel to a bright condition. Use of emery cloth, grit or sand blasting is recommended

Additional Information:

Approx. Rs 300 / LitreGet Latest Price

Additional Information:

Approx. Rs 200 / LitreGet Latest Price

Advantages:

• Improved workability and improved concrete quality
• Dramatic reduction in permeability of concrete and mortar
• Minimizes porosity and honey combing
• Produces dense homogenous concrete
• Instant and complete dispersion throughout the mix and uniform waterproofing throughout the concrete matrix

• Integral waterproofing liquid that improves the workability and reduces permeability of concrete and mortar, rooftop screed, waterproofing protection and plastering

• Required quantity of Concrete is measured and stirred into fresh bucket of water. The mixture should be added to the concrete / mortar and mixed thoroughly. Mixing water shall be added until required workability is obtained.

Approx. Rs 2,500 / PackGet Latest Price

Additional Information:

Approx. Rs 2,500 / PackGet Latest Price

Additional Information:

Approx. Rs 2,300 / PackGet Latest Price

Dr.S.Bond Two component High performance elastomeric cementitious  flexible sealing coat against ground and back water based on modified acrylic polymer emulsion gives excellent water proofing, excellent UV resistance, good adhesion with cementitious surfaces flexible in nature, withstand expansion and contraction.

• Minimum surface preparation needed - Low labour costs.
• Applied directly to the damp concrete and masonry
• Excellent adhesion - Bonds to porous and nonporous surfaces.
• Non-toxic-ideal for potable water tanks
• Waterproof - Excellent for damp-proofing basements
• Breathable-allows transmission of water vapour from interior of building
• Excellent for concrete roof, and masonry walls
• Good resistance to Carbon dioxide and Chloride ion diffusion

• Bathrooms, Wash Areas, Water Tanks, Swimming Pools, Retaining Walls, Septic Tanks, Sunkan Slabs, Balconies, Septic Tanks, Sukan Slabs. All Internal Or Interior Water Proofing Areas. 

Brush coat ( INT ) provides an elastomeric protective waterproof coating and is shown to resist positive hydrostatic pressure up to 7 meter head. The degree of resistance of Brush coat ( INT ) powder to water under pressure depends on the coating thickness. Areas subjected to moderate and heavy loads/hydrostatic pressure. minimum 2mm thickness coating is recommended with screed above.

• Preparation - All the surfaces which are to receive Brush bond, must be free from oil, grease, wax, dirt or any other form of foreign matter which might affect adhesion. Spalled and deeply disintergrated concrete should be removed to sound concrete and repaired with Renderoc System.
• Mixing - Brush coat ( INT ) liquid is poured into a plastic or metal drum. To this, an equal volume of clean fresh water is added, for brush application consistency. Then mixing is started with a slow speed drill (350-450 rpm). The powder component is added gradually to the liquid avoiding lump formation and mixed for 2-4 minutes. Mix and use. More material should not be mixed than can be used within pot life. Retempering with water should not be done. Keep on stirring during application.

Mixing Ratio:

Additional Information:

Approx. Rs 2,500 / BagGet Latest Price

Additional Information: